Samsung G360HU Repair Firmware

Samsung G360HU Repair Firmware

G360HUXXU0AOB1_OLB0AOB1_v4.4.4_Repair_Firmware

How To Flash Samsung Phone Using Odin

Step 1#: Download and install Samsung USB Driver on your PC.
Step 2#: Now Download and extract the Stock ROM .
Step 3#: Download and extract latest version of Odin.
Step 4#: Boot your device into download mode. To boot into download mode, Power off your device. Press and hold the Power button, Vol down button and Home button simultaneously. When your device vibrate, release the Power button but hold down home and vol down button then Press Vol Up button to continue. It’ll get you to download mode.
Step 5#: Open Odin on your PC then connect your device to your PC. When it’s connected, your device will be automatically recognized by Odin. At the lower interface of Odin, there should be written Added.
Step 6#: Here click on PA or PDA to add the tar.md5 file that you extracted it before. When your file added then click on Start to begin flashing.
Step 7#: When the flashing process is done then you’ll see a Pass or Reset box. Now disconnect your device from PC and reboot it.
:Important Notes:
::Take a Backup of your Personal data before flashing or installing the firmware on your
smart phone as this helps you to recover the personal data whenever any thing wrong
happens.